Architectural lighting kits for common residential exterior conditions.
Orenara system kits are curated around the areas where exterior lighting is most often needed — walls, paths, gardens, steps, entries, and outdoor transitions. Each kit is configured to suit the size and layout of the project.
Driver quality matters.
Orenara kits are intended to be paired with reliable Australian-compatible driver solutions rather than unknown generic power supplies. This helps support cleaner installation, better compatibility, and a more dependable supply outcome for every project.
Wall Wash Kit
The Wall Wash Kit is a curated lighting system for vertical surfaces where the goal is a restrained architectural effect rather than harsh, obvious brightness. It is suited to rendered walls, facades, courtyards, feature surfaces, and outdoor living areas.
The result should feel like atmosphere rather than a lighting installation — light that reveals the surface without dominating it.
- Rendered facades
- Feature and boundary walls
- Entry walls
- Courtyards
- Outdoor living zones
- Selected wall wash fixtures
- Matched driver solution
- Mounting or bracket components where required
- Spacing guidance
- System configuration based on run length
- Configured by wall length
- Adjusted for application type
- Scaled to number of illuminated surfaces
- Supply configured to project scope
Example Small Wall Wash Kit
- 2 × wall wash fixtures
- 1 × matched Australian-compatible driver
- Mounting accessories where required
- Spacing guide
Good fit for: Projects where the architecture needs subtle night-time definition without harsh or over-lit surfaces.
Pricing available soon — quoted by system size and run length.
Each Orenara kit is designed as a clear starting system rather than a loose collection of fittings. Final quantities are configured by project size, but the examples below show how this kit can be structured.
- 2 × wall wash fixtures
- Matched Australian-compatible driver
- Mounting accessories where required
- Spacing guide
- 4 × wall wash fixtures
- Matched Australian-compatible driver
- Mounting accessories where required
- Spacing guide
- 6 × wall wash fixtures
- Matched Australian-compatible driver
- Mounting accessories where required
- Spacing guide
Sizing note: Configured by wall length, number of illuminated surfaces, beam requirement, and driver load.
Example configurations only. Final supply is confirmed based on project size, fixture selection, driver requirements, and installation conditions.
What's included.
The Wall Wash Kit is typically built around a restrained linear wall wash fitting, a matched driver, and the hardware or guidance needed to support a clean installation outcome.
A linear architectural fixture selected for soft vertical illumination across facades, feature walls, and courtyard surfaces.
A matched driver selected to suit the fixture load and support reliable Australian installation compatibility.
Mounting brackets or installation accessories selected to suit the intended wall wash application.
Recommended fixture spacing and layout guidance based on wall length and lighting intent.
Path Lighting Kit
The Path Lighting Kit is a curated system for movement through gardens, pathways, side access, and boundary edges — with an emphasis on low glare and soft rhythm through the space.
The goal is lighting that reads as considered placement rather than installation. Felt before it is noticed.
- Approach and garden paths
- Side access paths
- Exterior circulation areas
- Landscape edges
- Low-level wayfinding
- Selected path lighting fixtures
- Matched driver solution
- Spacing guidance
- Basic layout guidance
- Supply configuration based on path length
- Configured by path length
- Adjusted for desired fixture spacing
- Scaled to number of path zones
- Supply configured to project scope
Example Small Path Lighting Kit
- 4 × path lighting fixtures
- 1 × matched Australian-compatible driver
- Basic spacing guide
- Supply configuration by path length
Good fit for: Projects needing subtle visibility and atmosphere rather than over-lit paths or harsh ground-level brightness.
Pricing available soon — quoted by path length and fixture configuration.
Final quantities are configured by path length and spacing preference, but the examples below show how this kit can be structured.
- 4 × path lighting fixtures
- Matched Australian-compatible driver
- Basic spacing guide
- 6 × path lighting fixtures
- Matched Australian-compatible driver
- Basic spacing guide
- 8–10 × path lighting fixtures
- Matched Australian-compatible driver
- Basic spacing guide
Sizing note: Configured by path length, spacing preference, and number of lighting zones.
Example configurations only. Final supply is confirmed based on project size, fixture selection, driver requirements, and installation conditions.
What's included.
The Path Lighting Kit is typically built around low-glare path fixtures, a matched driver, and spacing guidance configured to suit the path length and layout.
A low-glare fixture selected for garden paths, approach paths, and side access areas.
A matched driver selected to suit the fixture quantity and support dependable supply compatibility.
Recommended fixture spacing based on path length, rhythm, and desired lighting intensity.
Basic guidance to help define fixture placement across compact or extended path runs.
Step & Transition Kit
The Step & Transition Kit is a curated system for stairs, retaining walls, decks, and level changes where lighting needs to remain functional, discreet, and visually controlled.
Used well, this kit resolves the practical demands of safety and wayfinding without drawing visual attention away from the architecture itself.
- Exterior stairs
- Entry steps
- Retaining walls
- Deck steps
- Level changes and outdoor transitions
- Selected step or recessed fittings
- Matched driver solution
- Spacing and placement guidance
- Supply configuration by step count or run length
- Configured by number of steps
- Adjusted for transition zones
- Or scaled by linear run length
- Supply configured to project scope
Example Small Step Kit
- 4 × step or transition fixtures
- 1 × matched Australian-compatible driver
- Placement guide
- Supply configuration by step count
Good fit for: Projects where safety and clean architectural integration need to work together without the lighting drawing attention to itself.
Pricing available soon — quoted by step count or run length.
Final quantities are configured by step count or run length, but the examples below show how this kit can be structured.
- 4 × step or transition fixtures
- Matched Australian-compatible driver
- Placement guide
- 6 × step or transition fixtures
- Matched Australian-compatible driver
- Placement guide
- 8–12 × step or transition fixtures
- Matched Australian-compatible driver
- Placement guide
Sizing note: Configured by step count, run length, mounting location, and driver requirements.
Example configurations only. Final supply is confirmed based on project size, fixture selection, driver requirements, and installation conditions.
What's included.
The Step & Transition Kit is typically built around low-level step fittings, a matched driver, and placement guidance suited to the stair count or transition length.
A discreet low-level fixture selected for stairs, retaining walls, decks, and level changes.
A matched driver selected to suit the fixture configuration and support reliable installation compatibility.
Recommended fixture positioning for safe, visually controlled step lighting outcomes.
Required accessories or installation allowances depending on fixture type and location.
Entry Lighting Kit
The Entry Lighting Kit is a curated system for front entries, approach zones, gates, and arrival moments where the goal is a calmer, more resolved first impression.
The right entry lighting creates warmth and definition without over-announcing itself — the house should feel welcoming, not floodlit.
- Front entries and porch areas
- Gates and arrival paths
- Entry walls and facade edges
- Approach sequences
- Selected entry and path fixtures
- Optional wall wash element where appropriate
- Matched driver solution
- Placement guidance
- Supply configuration based on entry size
- Configured by entry zone size
- Adjusted for path length
- Scaled to surrounding surfaces
- Supply configured to project scope
Example Small Entry Kit
- 2–4 × entry or path fixtures
- 1 × matched Australian-compatible driver
- Placement guidance
- Optional wall wash element where appropriate
Good fit for: Projects where the arrival sequence needs warmth and definition — new builds, front-of-home renovations, and gate or entry upgrades.
Pricing available soon — quoted by entry size and configuration.
Final quantities are configured by entry zone size and path length, but the examples below show how this kit can be structured.
- 2–4 × entry/path fixtures
- Matched Australian-compatible driver
- Placement guidance
- 4–6 × entry/path fixtures
- Matched Australian-compatible driver
- Placement guidance
- 6–8 × entry/path fixtures
- Matched Australian-compatible driver
- Placement guidance
Sizing note: Configured by entry zone size, path length, surrounding surfaces, and desired lighting emphasis.
Example configurations only. Final supply is confirmed based on project size, fixture selection, driver requirements, and installation conditions.
What's included.
The Entry Lighting Kit is typically built around a combination of entry or path fixtures, a matched driver, and layout guidance suited to the arrival zone.
A selected fixture for front entries, gates, facade edges, and arrival moments.
A matched driver selected to support the required fixture quantity and project layout.
Basic layout guidance for entries, gates, small paths, and front-of-home zones.
Where appropriate, a wall wash element can be included to better define the entry architecture.
Garden Accent Kit
The Garden Accent Kit is a curated system for feature planting, low walls, textured surfaces, and landscape focal points where subtle emphasis is needed.
Depth and atmosphere are the goal here — not brightness. The kit is designed to add warmth and presence across the landscape without creating a harsh or over-lit garden.
- Planting zones and garden beds
- Feature trees and small trees
- Textured walls and surfaces
- Outdoor living edges
- Landscape focal points
- Selected accent fixtures
- Matched driver solution
- Beam and placement guidance
- Supply configuration based on zone size
- Configured by garden zone size
- Adjusted for number of focal points
- Scaled to desired lighting emphasis
- Supply configured to project scope
Example Small Garden Accent Kit
- 2–3 × accent fixtures
- 1 × matched Australian-compatible driver
- Placement guidance
- Supply configuration by garden zone
Good fit for: Projects where depth and atmosphere across the landscape are more important than brightness or obvious lighting effects.
Pricing available soon — quoted by zone size and configuration.
Final quantities are configured by garden zone size and focal points, but the examples below show how this kit can be structured.
- 2–3 × accent fixtures
- Matched Australian-compatible driver
- Placement guidance
- 4–6 × accent fixtures
- Matched Australian-compatible driver
- Placement guidance
- 6–10 × accent fixtures
- Matched Australian-compatible driver
- Placement guidance
Sizing note: Configured by garden zone size, number of focal points, beam preference, and driver requirements.
Example configurations only. Final supply is confirmed based on project size, fixture selection, driver requirements, and installation conditions.
What's included.
The Garden Accent Kit is typically built around discreet accent fixtures, a matched driver, and placement guidance suited to focal points within the landscape.
A selected fixture for feature planting, small trees, textured walls, and focal landscape elements.
A matched driver selected to suit the accent lighting configuration and support dependable supply compatibility.
Guidance for locating fixtures and aiming light toward focal planting or surface detail.
Configured according to the size of the planting area and number of focal points.
Not sure which kit suits your project?
Send us the area you are lighting — plans, photos, or a short description — and we'll confirm the right starting point. No obligation, no complex process.